a):Before application, wash clean the base surface and start application after there in no visible water. b): Mix the Biao Yuan Tile glue and water with a proportion of 3.5 to 4:1, put the powder into water and mix them into a uniform paste with an electric mixer, stop stirring and wait for about 2-3 minutes, then stir them once again before use. c): Use a toothed scraper to apply the glue evenly on the base surface of the concrete, each apply the glue in about 1 square meter each time, and then apply the glue fully on the back surface of the mosaic or ceramic tile, stick the mosaic or ceramic tile on the base surface, press it tightly and flatten it. At last remove the excessive glue on the surface with a scraper.
Precautions for tile adhesive: A):The suitable application temperature is 4-40℃. B):No construction shall be carried out in rain days. C):It is strictly prohibited to add water into the dried glue and use it again. D):In 24 hours after tile paving, two days of water-spray curing must be done. E): As different mosaics and tiles are made of different materials, it is recommended to start with a small area for trial, and then start application on large areas according to the test result. F): Store the product in a coo and dry place on a pallet and off the ground, it can be stored for one year in an unopened package.
Limits for tile adhesive: 1):Bonding tiles to high elastic or high shaking walls. 2):Bonding tiles to glass or metal surfaces. 3): Bonding tiles to water absorbing stone surface or wood boards.
Test Cooperation Ratio : Tile adhesive powdeer : Water = 100:25
Pass or Not
Nomal tensile adhesive strength test , MPa
After immersed in water tensile adhesive strength test , MPa
After thermal ageing, tensile adhesive strength test , MPa
After stick up 20 min, tensile adhesive strength test, MPa
All test result passed standard JC/T 547-2005 C1 BiaoYuan Tile adhesive specification requirment.