25kg/bags ,20kg/bags ,We can production OEM order .
Shipped in 2 days after payment
Construction adhesive for tiles,Marble and stone
We are looking for agents/wholesle all over the world ! We can provide the best quality production and price !!! We can make OEM rder !!!
1,this product is mainly used for cement-based wall and ceramic tile adhesion. Improve the flexibility and deformability of adhesive mortar
2,effectively reduce ceramic tile falls off and empty drum which caused by cement shrinking
3,enhance the adhesive performance of ceramic tile adhesive mortar after water resistant
4,this model applies ceramic tile adhesive mortar.
1. Has strong cohesion force. Reduce the common phenomenon of tiles detaching and peeling when pasted by Portland cement. 2. Be premixed and produced, the product is stable, water and used, to protect the construction environment. 3. Has strong water retention, no need to dip tiles and wet walls, thin construction, easy operation, to reduce materialconsumption and building load. 4. Has good flexibility to resist effectively the destruction of various stresses. 5. Has special formula to avoid completely the common phenomenon of tiles cracking, detaching and peeling by Portland cement. 6. It is no-toxic, no-radiation, no smell and environmental. 7. Has special formula to prevent the flow with too much southbound crash, easier construction.
1:It can be used in sticking mosaic/: enamel tile/general tile/ceramic tile and all kinds of slabstones /marble /natural dimension stone etc. on the concrete surface / plaster base surface / on brick wall/ brick & stone in outdoor and indoor
2:Common indoor and outdoor walls , floor tiles and paste caulk ;
3:Small paper tiles, mosaic paving , caulk .
1:Mosaic gum paste and caulk the construction can be carried out simultaneously , easy to use and fast, and material, labor and time saving .
2:Compared with traditional mosaic glue cement paste paste method , bond stronger , Paste stronger and more secure.
3:Mosaic adhesive has a more favorable impermeability crack and anti-aging properties, can effectively reduce and prevent anti- efflorescence pulp , tears and other pollution linked to the phenomenon of tiles .
4:Colorful mosaic with glue , mildew , water and other excellent performance.
1. All the surface should be strong/ dry/ clean, no shake/ oil stain/ wax stain/ concrete curing agent and other loose things.
2. If the surface is covered with paint, it should be hacked and at least exposed 80%.
3. New concrete surface should be cured for 28 days at least. Then pave tile.
4. New plaster base should be cured for 7 days at least. Then pave tile.
5. You can use industrial detergent or degreasing dirt agent to clean the old concrete or plaster surface. Then use high pressure tap to clean up. It can be paved tile after airing 24h.
6. Clean the residue of concrete surface, especially the residual mold release of the slant concrete surface.
7. Before construction, the surface need to be wetted, if the surface is water absorption strong or in high temperature/dry environment.