20kg/bags ,25kg/bags ,40kg/bags ,we can production OEM order
Qingdao ,Shanghai ,Ningbo,huangpu,etc
1 - 27
To be negotiated
Single Part Flexible White Wall and Floor Tile Adhesive Manufacturer
It is a cementitious, water resistant, and single component tile adhesive. It is designed simply to mix with water to give strong, non-slip, and highly workable adhesive mortar for both interior and exterior applications with setting time of 6 hours.
1 This product is polymer modified cement tile adhesive, and the performance is better than general cement mortar.
2 Sliding-resistance,dispense with soaking bricks,thin construction layers ,high stickiness,no hollowness,environment friendly,water-fast well.
1) Suitable for interior and exterior use. 2) Suitable for substrate made from concrete, masonry, pre-cast material and lightweight brick. 3) Suitable for walls,floors and roofs of architects, such as tunnels, bridges, basement, kitchen, bathroom, balcony, swimming pool and reservoir and so on. 4) Suitable for architects with structure which might easily vibrate and split, such as post-cast strip, pipe orifice.
1.Use 3*3mm notched trowel,approx.1.5-1.8kg/m2
2.Use 6*6mm notched trowel,approx.2.8-3.0kg/m2
(The above dosage are recommened for the even substrate)
Primary surface should be smooth solid, and fully dry, no sand, crack, bump inequality defects; no dust traces of oil and dirt. So, when the surface is rough or raised, application of trowels to its eradication, in order to deal with smooth surface.
B:Open the packing bags :
Cleaning benefits to cut off the dust, keep clean, open the package, with electric blender into uniform, no powder paste, mortar to be standing ten minutes after stirring once again increases the strength. The note, with the shovel to leave no droplet pulp scraping ideal condition.
C:Large area construction: With a brush dipped in water, swipe the back of the tile, then wipe with a toothed blade to about one cubic meter of powder, then rub the pressure on the tile can be.